Unsung Heroes in My Sewing Notions Drawer

re: Unsung Heroes in My Sewing Notions Drawer

ajsaprons — Sun, 02 Sep 2012 13:28:34 GMT

There are so many great tips here. My unsung heros of 40 years are my medium sized needle nose plyers, long bamboo knitting needle, and a long, thin crochet hook that has a flat head on the end. I can not tell you how many times those plyers have helped me remove pins with broken heads from thick fabric and leather, change needles in my machine, etc. The needle hook has been one of my primary "pushing" tools when turning fabric. BUT NOW... I have a new favorit - a long very thin hemostat for turning. Woo Who!

re: Unsung Heroes in My Sewing Notions Drawer

backhome — Fri, 31 Aug 2012 21:40:10 GMT

I use several patterns, making Halloween costumes for the kids and I, and clothes for myself. For this I have always used butter knives for my pattern weights. Also, when it comes to hemming jeans I have to have a set of pliers near by or the seams never make it under the foot.

re: Unsung Heroes in My Sewing Notions Drawer

Rose@Stitch — Fri, 31 Aug 2012 13:08:49 GMT

Great choices! I had heard about using parchment paper, but have never tried it--even though I do have a roll of it in my kitchen pantry. And bless all bodkins. After growing up and painfully inching elastic through waistbands with a safety pin, the bodkin was a gigantic Eureka! moment.

re: Unsung Heroes in My Sewing Notions Drawer

SuzanneK — Thu, 30 Aug 2012 03:17:30 GMT

I have three favorite items in my notions drawer. The first is my mother's darning egg--the type with a handle. The second is a chop stick for turning small things inside out. And the third is my seam ripper. I may not use it often but when I need it there is absolutely no substitute.

re: Unsung Heroes in My Sewing Notions Drawer

Grandcarr — Thu, 30 Aug 2012 00:57:27 GMT

I was introduced to "Thang Purple Thang " at the Sewing and Quilting Expo this summer. I immediately purchased 2 of them. They have multiple uses and I keep them nearby for all types of sewing! Below are some of the advertised uses.

It pushes, pokes, pulls, p-fudges, p-turns, p-stuffs. It makes its own uses! Every quilter/crafter/seamstress needs one.

No more struggles with stuffing, turning, pulling, and poking at your projects. Just reach for That Purple Thang! Use the 1/4 inch flat edge to score stabilizers or paper stencils along stitching lines. Pull ribbon or elastic through elastic casings using the slotted end.

re: Unsung Heroes in My Sewing Notions Drawer

C. Ford — Wed, 29 Aug 2012 20:19:24 GMT

I trim off the selvages from new quilting cotton when I need to add to my stash of "turning tools". To use the selvage strip inside a tube as a turning aid, lay it against the fold of the strip of the fabric that is folded right sides together. Leave one end stick out an inch or so and be sure the selvage strip is long enough to stick out the bottom end of the tube. Double stitch across the short end of the tube, catching the selvage material, then stitch down the open side. It is easy to pull on the free end of the selvage, turning the tube right-side out.

re: Unsung Heroes in My Sewing Notions Drawer

Kinney — Wed, 29 Aug 2012 15:34:07 GMT

I use a brass stiletto when piecing, the ability to hold the last micro bit of fabric from shifting under the presser foot is invaluable. The sharp metal point on the stiletto holds the fabric better than pinning method at the end of a seam.

re: Unsung Heroes in My Sewing Notions Drawer

rawind — Wed, 29 Aug 2012 15:13:02 GMT

A bodkin is my must have and has been since I learned to sew. I don't use it often but often enough that it'd better be around when I need it.

re: Unsung Heroes in My Sewing Notions Drawer

FuzzyWhiskers — Wed, 29 Aug 2012 14:47:05 GMT

Two things I have discovered for fusible project. Parchment paper, the kind you bake cookies on is a great "non-stick" sheet. I put one on the ironing board, and one over whatever I'm fusing, or just keep a folded sheet on the ironing board and slip my project inside. Any extra fusible sticks to the sheet, and after cooling a few seconds, can be scraped off with your fingernail and tossed in the trash.

The second discovery is water-based "Goof-Off", NOT the solvent based kind. My iron was gunky, and I sprayed some of the Goof-Off on a paper towel, swiped it over a COLD, (I emphasize COLD) iron, and voila! it was clean and shiny. I get my Goof-Off at the Home Depot.

And I do love my Teflon sheets, but they are expensive and not everyone has one.